Service Area

I installed a new hot tub circuit. The job involved trenching, installing conduit, pulling wire, installing a GFCI hot tub panel, and installing a new circuit breaker.

I recently completed an underground electrical service for a customer. The job involved installing a 100 amp service from the transformer to the customer's home. The service included trenching from the transformer to the meter pedestal, installing a 100 amp main breaker meter pedestal, pulling wire, installing ground rods and grounding the electrical system, and installing conduit. The customer was very pleased with the work and I was happy to have been able to help them with their electrical needs.

I installed new wiring and outlets for a bathroom and dryer. I also installed new light fixtures.

I installed a roof and gutter deicing system on a residential home. This system is designed to prevent ice dams and snow buildup on the roof, which can cause water damage to the home. The system includes a series of heating elements that run along the roof and gutter, and a control panel that allows me to adjust the temperature and schedule the system to run automatically. The installation process was complex, but I was able to complete it in a timely manner and the homeowner was very satisfied with the results.

I installed led bulbs for a kitchen light fixture. I also replaced an outdoor security light.

I replaced an exterior light fixture. I also installed led light bulbs for the existing light fixtures.

I was called to a job where a generator was not working. I arrived at the site and walked the customer through the setup. I also checked the generator's oil level. I did a complete oil change and now the generator is running great.

I installed a ceiling fan and a Ring doorbell for a client.

I installed conduit and wiring for the exterior electrical service.

Installed new Panasonic bathroom exhaust fans and a new dedicated circuit. The work involved removing the old bathroom exhaust fans, cutting holes in ceiling to fit the new fans, and installing the new exhaust fans. Installed NM copper wiring from the main electrical panel to the kitchen for a new outlet.

I installed an outdoor security light and a new light switch.

I installed a 100 amp service upgrade for a client. The job involved removing the old meter socket, wiring, and electrical panel. Installing new wiring, new meter socket, new 100 amp main breaker panel, and all new circuit breakers. Grounding and bonding of the electrical system. Installed new ceiling fan and foyer light fixture.

I installed a generator interlock kit to ensure that the generator would only start when the power was out.

I replaced a 200 amp main breaker panel in a residential home. The job included removing the old electrical panel, installing a new main breaker panel with all new circuit breakers. Installing grounding and bonding of the electrical system.

I installed a 30 amp 120/240 volt generator interlock kit. The job involved installing new wiring, a power inlet, an interlock kit, and a new circuit breaker. Tested the new interlock kit and worked properly.

I installed a new dedicated circuit for a kitchen appliance. The job involved running new NM copper wiring from the main breaker panel and into the kitchen. I also installed a tamper resistant outlet with a new circuit breaker.

I recently completed a job updating a 100 amp service. It involved replacing the old meter base and wiring, as well as installing a new service drop. The customer was very pleased with the results, and I'm glad I could help them with their electrical needs.

I added new GFCI outlets and wiring in multiple areas.

I recently completed a job installing a new 100 amp service and circuits for a customer. This involved running new wires from the main electrical panel to the service panel, installing the service panel, and connecting the circuits to the appropriate breakers. I was able to complete it on time and to the customer's satisfaction.

I installed new ceiling fans and light fixtures in a residential home.

I was hired to install new ceiling fans in a residential home. I removed the old fans and installed new ones, ensuring they were securely fastened and properly balanced. I also made sure the wiring was properly connected and tested the fans to ensure they were working correctly.

I installed ceiling fans in two rooms and replaced an outlet.

I upgraded a 100 amp service for a customer. Installed new meter socket, main breaker panel, circuit breakers, grounding and bonding of electrical system.

I replaced a light switch and outlet in a residential home.

Repaired electrical service. Tree fell on the electrical lines and ripped the riser and meter socket off of the house. I installed a new riser through the roof with a new meter socket and wiring.